Filter
Top Products
1 SpeedTouch™ Installation
E-DOC-CTC-20030814-0001 v1.0
20
Configuration of the
SpeedTouch™
Proceed as follows:
1 Open a web browser and browse to the SpeedTouch™ web pages at
http://10.0.0.138. See “5 SpeedTouch™ Web Interface” on page 47 for more
information.
Note If you can not access the SpeedTouch™ web pages, it is probably not in
its default state. It is recommended to reset the device.
2 The embedded Easy Setup wizard will appear automatically:
Click Next.
Note If Easy Setup doesn’t start automatically go to
Advanced > Easy Setup.
3 The following window invites you to select the appropriate Service for your inter-
net connectivity:
In the Service list, select the Service as specified by your Service Provider and click
Next to continue.
Note If only one Service is available, this window will not be shown.
4 Subsequent screens will guide you through the configuration setup of the Speed-
Touch™. Follow the instructions and enter the required information whenever
needed. The requested information will depend on the selected Service profile
and should be provided by your Service Provider.
Click Next whenever requested.