Filter
Top Products
6 SpeedTouch™ NAPT Manager
E-DOC-CTC-20030814-0001 v1.0
71
3 The Add Port Mapping window appears.
If you want to:
• Enter a port mapping for a specific application:
Click the Basic tab. Select an application in the Application list and enter a
host IP address.
By default, the IP address of the PC from which you are running the NAPT
Manager will be taken as host IP address. To add a NAPT entry for another
PC, you must change the proposed IP address.
• Manually add a static NAPT entries:
Click the Advanced tab. Select a protocol in the Protocol list and enter Port
and Host IP address in the appropriate fields.
By default, the IP address of the PC from which you are running the NAPT
Manager will be taken as host IP address. To add a NAPT entry for another
PC, you must change the proposed IP address.
• Specify a default server IP address:
Click the Default inbound host tab. Enter the new IP address in the Host IP
address field.
Click Set to add your entry to the list.
4 If all required entries are added click Next to save the new entries.