Filter
Top Products
2 SpeedTouch™ Internet Connectivity
E-DOC-CTC-20030814-0001 v1.0
29
2.2 Connect to the Internet via a Host PPPoE Dial-
in Client
Introduction This section explains how you can connect to the Internet using a Broadband PPPoE
dial-in application. The PPP over Ethernet connection scenario provides PPP-like dial-in
behavior over the virtual Ethernet segment.
To be able to use a broadband dial-in application on your computer for connecting to
the Internet, the SpeedTouch™ needs to be configured for Bridged Ethernet or Routed
PPPoE (with PPPoE relay) via the SpeedTouch™ Setup wizard or the embedded Easy
Setup.
BroadBand dial-in
clients
To connect to the Internet you can use:
• An MS Windows XP broadband dial-in client.
See “2.2.1 Using an MS Windows XP BroadBand Connection.” on page 30 for
more information.
• A Mac OS X broadband dial-in client.
See “2.2.2 Using the Mac OS X PPPoE Dial-in Client” on page 34 for more infor-
mation.
- or -
• A broadband PPPoE dial-in client provided by your Service Provider to connect to
the Internet
Note Upon availability of OS-specific PPPoE dial-in client applications, the
latter method is Operating System independent.
For PPPoE session connectivity from a Mac OS 8.6/9.x system, a host
PPPoE dial-in application is mandatory.