Filter
Top Products
4-10
Chapter 4: SYSTEM SETTINGS (SETTING USING BROWSER)
5.1. Pattern Selection Area
(1) Programmed Pattern List
Displays a list of the unit's programmed patterns, and whether or not broadcasts are possible.
Patterns which cannot be broadcast due to the Broadcast Spec settings are highlighted in red with an
"NG" displayed in the corresponding "Enable Broadcast" column. Disabled broadcasts are usually caused
by incorrect multicast or transmission sampling frequency settings (for instance, local broadcasts cannot
be made at 32 kHz). Be sure to review the Broadcast Spec settings.
[Pattern Selection]
Select the pattern to edit or delete.
After selection, press the Pattern Edit button to edit, and the Pattern Deletion button to delete.
(2) Pattern Edit button
Displays the selected broadcast pattern in the pattern edit area.
The "Pattern Edit" title is displayed in the edit area.
Pressing the Save button after edit updates the pattern setting.
(3) Pattern Addition button
Adds a new broadcast pattern. The "Addition of Pattern" title is displayed in the pattern edit area. Pressing
the Save button after edit adds the pattern. The new pattern is added to the programmed pattern list and
displayed in the pattern selection area.
(4) Pattern Deletion button
Deletes the selected broadcast pattern and updates the NX-100/100S setting file.
Caution
Never restart the unit or turn off the power during updates, or while the STATUS indicator on the front
panel of the NX-100/100S is flashing.
5.2. Pattern Edit Area
The pattern addition display differs from the pattern editing display for the selected pattern. (The "Addition of
Pattern" screen is displayed by default when no pattern is selected.)
5.2.1. Pattern addition
"Addition of Pattern" is displayed as the pattern edit area's title when no pattern is selected or when the
Pattern Addition button is pressed.
(1) Name
Enter the pattern name to be programmed into the NX-100/100S.
"New Pattern" is displayed when the Pattern Addition button is pressed. Change this indication to the
appropriate pattern name.
Caution
Take care not to assign a pattern name which is already programmed.
(2) Direction
Select the broadcast direction.
Transmission: Broadcasts from the original unit to other units.
Reception: Broadcasts from other units to the original unit.
Local: Broadcasts from the original unit's audio input to its own audio output.
Caution
"Local" cannot be selected when the transmission sampling frequency is set to [32 kHz] in the Broadcast
Spec setting.