Filter
Top Products
4 SETTING ITEMS (ADMIN)
146 SETTING NETWORK FUNCTIONS
Setting the SMB Protocol
When you want to enable this equipment visible in the Windows network, you must enable the
SMB protocol and enter the NetBIOS name and workgroup to specify the device name of this
equipment and workgroup where this equipment will be visible.
Also if your network uses the WINS server to allow the SMB communication across the seg-
ments, you must specify the WINS server address, so that this equipment will be visible from the
different segment.
This must be enabled for SMB printing, Save as file to the network folder using SMB, and shar-
ing the “FILE_SHARE” folder (that is the local folder of this equipment) in the network.
1
Press the [NETWORK] button in the ADMIN menu.
y The NETWORK menu is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU". P.107
2
Press the [SMB] button.
y The SMB screen is displayed.