Toshiba 2500C All in One Printer User Manual


 
3 SETTING ITEMS (USER)
88 SETTING FAX FUNCTIONS
SETTING FAX FUNCTIONS
You can change the initial setting (default setting) of fax and Internet Fax features.
1
Press the [USER FUNCTIONS] button on the control panel to enter
the User Functions menu.
2
Press the [USER] button, and then press the [FAX] button on the
touch panel.
y The FAX screen is displayed.
3
Specify the following items as you require.
y In the “RESOLUTION” option, press the desired mode button.
y In the “ORIGINAL MODE” option, press the desired mode button.
y In the “EXPOSURE” option, press light or dark buttons to specify the default expo-
sure manually, or press the [AUTO] button to select auto mode for the default expo-
sure mode.
y In the “TX TYPE” option, press the desired mode button.
[MEMORY TX] — Press this to set the Memory TX mode as default transmission
mode that will send after scanning and saving all originals in the memory. This mode
enables multi-address transmission.
[DIRECT TX] — Press this to set the Direct TX mode as default transmission mode
that will send originals page by page after every original has been scanned. This
mode disables multi-address transmission.
The “TX TYPE” option is available only when the optional Fax unit is installed.
4
Press the [Next] button to display the next screen.