Filter
Top Products
4 SETTING ITEMS (ADMIN)
152 SETTING NETWORK FUNCTIONS
3
Specify following items as required.
y ENABLE HTTP SERVER — Press the [ENABLE] button to enable the HTTP network
server service, or [DISABLE] button to disable the HTTP network server service.
This must be enabled for TopAccess and e-Filing web utility.
y [PRIMARY PORT NUMBER] — Press this to enter the primary port number to be
used for the HTTP access from the other client. It is recommended to use the default
port number “80” if you are not sure changing this port number.
y [SECONDARY PORT NUMBER] — Press this to enter the secondary port number to
be used to access the TopAccess and e-Filing web utility. It is recommended to use
the default port number “8080” if you are not sure changing this port number.
y ENABLE SSL — Press the [ENABLE] button to enable the SSL for accessing TopAc-
cess and e-Filing web utility, or [DISABLE] button to disable the SSL for accessing
TopAccess and e-Filing web utility. When this is enabled, the data transferred
between the equipment and client computers will be encrypted using a private key
when operating TopAccess and e-Filing web utility.
To enable SSL, you must create a self-signed certificate in the equipment or import the
server certificate using TopAccess. If the self-signed certificate is not created or the
server certificate is not imported, the SSL cannot be enabled.
4
Press the [ENTER] button.
y Returns you to the NETWORK menu.
5
Continue to another network setting if required, then press the
[APPLY NOW] button.
y The "NETWORK INITIALIZING" message is displayed and this equipment starts ini-
tializing the network interface card to apply the changes.