Toshiba AS311 Network Card User Manual


 
User’s Manual
1
Safety Precautions
Safety Precautions
This module (AS311) has been designed for Toshiba’s Programmable Controller
PROSEC-T3 (hereafter called T3). Use this module only on the T3’s rack.
Read the Safety Precautions described on the T3 User’s Manual before using the T3 and
this module.
Follow the instructions described on this manual and on the T3 User’s Manual when
installing and wiring the T3 and this module.
Do not touch the connector pins or components on the printed circuit board of this module.
The maximum number of AS311s that can be controlled by one T3 is not limited by
software. However, this module consumes maximum 1 A of internal 5 Vdc power. Confirm
that the total 5 Vdc consumed current per one power supply module is within the limit (7A).
Symbols Used In This Manual
Pay attention to information preceded by the following symbols.
Refers to helpful suggestions on how to operate effectively.
Refers to information considered essential for full understanding of operation.
And refers to conditions that could damage the equipment or render it
temporarily inoperative.
HINT
NOTE