Filter
Top Products
2. PRINTER SETUP
EO1-33032
2.6 Turning the Printer ON/OFF
2- 5
2.6 Turning the Printer
ON/OFF
2.6.1 Turning ON the Printer
2.6.2 Turning OFF the
Printer
When the printer is connected to a host computer it is good practice to
turn the printer ON before turning on the host computer and to turn OFF
the host computer before turning off the printer.
1.
To turn ON the printer power, press the power switch as shown in the
diagram below. Note that ( ) is the power ON side of the switch.
2.
Check that the message ON LINE appears on the LCD Display and
that the ON LINE and POWER LED lights are illuminated
1.
Before turning off the printer power switch verify that the ON LINE
message is on the LCD Message Display and that the ON LINE LED
light is on and not flashing.
2.
To turn OFF the printer power press the power switch as shown in the
diagram below. Note that ( ) is the power OFF side of the switch.
CAUTION!
Use the power switch to
turn the printer On/Off.
Plugging or unplugging the
power cord to turn the
printer On/Off may cause
fire, an electric shock, or
damage to the printer.
CAUTION!
1. Do not turn off the
printer power while the
media is being printed
as this may cause a
paper jam or damage
to the printer.
2. Do not turn off the
printer power while the
ON LINE light is
blinking as this may
cause damage to your
host computer.
NOTE:
I
f a message other than ON
L
INE appears on the display o
r
the ERROR LED lamp is
illuminated, go to Chapter 5.1,
Error Messages.
Power Switch
Power Switch