Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33032
A4.6 Test Print
A4-17
A4.6 Test Print (Cont.)
Issue Mode Selection
Select the issue mode for the test print by selecting between “[S]
NORMAL” (Batch mode) and “[H] PEEL OFF” (Strip mode).
After selecting the Issue Mode, press the
[PAUSE]
key to go to Label
Length Setting.
Label Length Setting
Select the label length for the test print in a range from 5 mm to 999 mm.
[FEED]
key: Pressing the
[FEED]
key once causes a –1 mm
change, down to 5 mm.
[RESTART]
key: Pressing the
[RESTART]
key once causes a +1 mm
change, up to 999 mm.
After selecting the label length, press the
[PAUSE]
key to go to Paper
Feed Selection.
Paper Feed Selection
Select whether or not a paper feed is performed.
After selecting the paper feed, press the
[PAUSE]
key. If "PAPER
FEED" was selected the printer will feed the media. The display returns
to the “<4>TEST PRINT”.
[RESTART]
[FEED]
Batch mode
Strip mode
[RESTART]
[FEED]
[RESTART]
[FEED]
Paper feed is
available.
Paper feed is no
t
available
.
NOTE:
Press and hold the
[RESTART]
or
[FEED]
key to advance the
values quickly and continuously.
To stop, release the key.
NOTE:
When “PAPER FEED” is
selected, the printer feeds the
media to the correct print start
p
osition for the selected
conditions.
When “PAPER NO FEED” is
selected, the printer makes no
p
re-feed to set the print start
p
osition. If the print start
p
osition adjustment is
unnecessary, Select "PAPER
N
O FEED" and save media.