Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33032
A4.6 Test Print
A4-16
A4.6 Test Print (Cont.)
Print Speed Setting
Select the print speed for the test print.
After selecting the print speed, press the
[PAUSE]
key to go to Sensor
Type Selection.
Sensor Type Selection
Select the sensor type among “TRANS” (Feed Gap Sensor), “REFLECT”
(Black Mark Sensor) and “NONE”.
After selecting the sensor type, press the
[PAUSE]
key to go to Ribbon
Type Selection.
Ribbon Type Selection
Select the ribbon type for the test print from “NO RIBBON”, “RIBBON
TRANS.”, and “NO TRANS.”.
After selecting the printing mode, press the
[PAUSE]
key to go to Issue
Mode Selection.
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
No ribbon
Transmissive ribbon
None
Black Mark Sensor
Feed Gap Sensor
NOTE:
Select the sensor type which
matches the media being used.
B
asically, the Reflective Sensor
(Black Mark Sensor) is for tag
p
aper, and the Transmissive
Sensor (Feed Gap Sensor) is
f
or labels.
NOTE:
Select the ribbon type which
matches the media and ribbon
being used.
B
asically, the Transmissive and
N
on Transmissive are for the
use with ribbon, and No Ribbon
is for use with Direct Thermal
p
aper.
Non transmissive ribbon