Filter
Top Products
1. PRODUCT OVERVIEW
EO1-33032
1.1 Introduction
1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
1.4 Accessories
Thank you for choosing the TEC B-492L/R series barcode printer. This
Owner’s Manual contains valuable information from general set-up to
confirming the printer's operation using test prints. You should read it
carefully to help you gain maximum performance and life from your
printer. This manual should be kept close at hand for everyday reference.
Please contact your TOSHIBA TEC representative for further
information concerning this manual.
The B-492L/R printer has the following features:
•
Superior hardware, including a specially developed 12 dots/mm (300
dots/inch) thermal print head which gives very clear print quality at
print speeds of 127 mm/sec. (5 inches/sec.), 203.2 mm/sec. (8
inches/sec.), and 254 mm/sec. (10 inches/sec.).
•
Separation of the power supply unit realized a compact body of the
printer.
•
When the optional interface board is installed, Web functions such as
remote maintenance and other advanced network functions are
available.
•
The PCMCIA Interface Board and the KB-80-QM Keyboard Unit are
provided as optional equipment.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
When unpacking the printer, please check that the following accessories
are supplied with the printer.
Owner’s Manual (1 copy)
(Doc./No. EO1-33032)
US Power Cord (1 pc.)
(P/No. FBCB0030202)
NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
TOSHIBA TEC shall have no
liability for any damage of
any kind sustained during
transportation of the
product.
2. Keep the cartons and pads
for future transportation of
the printer.
Fan Filter
(P/No. FMBB0036801)
TOSHIBA TEC CORPORATION
TEC Label/Tag Printer
B-492-QQ
Owner?s Manual
EU Power Cord (1 pc.)
(
P/No.: EKA-0055001
)
CD-ROM
(P/No. FMQB0083801)