Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33032
A4.5 Printer Parameter Fine Adjustment
A4-10
A4.5 Printer Parameter
Fine Adjustment
(Cont.)
X Axis Fine Adjustment
With this parameter you can fine adjust the print position on X Axis.
When “<3>ADJUST SET” appears, press the
[PAUSE]
key 4 times.
[FEED]
key: Pressing the
[FEED]
key once causes a –0.5mm
change, down to –99.5 mm.
[RESTART]
key: Pressing the
[RESTART]
key once causes a +0.5mm
change, up to +99.5 mm.
After completing the fine adjustment, press the
[PAUSE]
key.
[RESTART]
[FEED]
NOTES:
1. The X Axis fine adjustment
is performed to fine adjust
the print position in
horizontal direction (left or
right).
2. Adjust the X axis within the
effective print range. when
the value reaches the
coordinate 0, the value
remains unchanged even if
the subsequent negative fine
adjustments are made.
3. This adjustment cannot be
used in the Self Test mode
or Test print.
4. The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter. The maximum
X axis fine adjustment value
is
±
99.5mm. When the
addition of values reaches
the maximum, the value
remains unchanged even if
subsequent fine adjustments
are made.
X Axis Fine Adjustment
(Example)