Toshiba B-SX6T Series Barcode Reader User Manual


 
APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33056
APPENDIX 2 INTERFACE
EA2- 4
Serial interface (Option: B-SA704-RS-QM-R)
Type: RS-232C
Communication mode: Full duplex
Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps
Synchronization: Start-stop synchronization
Start bit: 1 bit
Stop bit 1 bit, 2 bit
Data length: 7 bit, 8 bit
Parity: None, EVEN, ODD
Error detection: Parity error, Framing error, Overrun error
Protocol: Unprocedure communication
Data input code: ASCII code, European character 8 bit code, graphic 8 bit code, JIS8 code, Shift JIS
Kanji code, JIS Kanji code
Receive buffer: 1M byte
Connector:
Pin No. Signal
1 N.C
2 TD (Transmit Data)
3 RD (Received Data)
4 DSR (Data Set Ready)
5 SG (Signal Ground)
6 DTR (Data Terminal Ready)
7 CTS (Clear to Send)
8 RTS (Request to Send)
9 N.C
RFID
B-SX708-RFID-U2-EU-R
Module: TOSHIBATEC TEC TRW-EUM-01
Frequency: 869.7 MHz to 870.0 MHz
Output: 10 to 100 mW
Available RFID tag: EPC C1 Gen2