Toshiba B-SX6T Series Barcode Reader User Manual


 
2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.7 Turning the Printer ON
E2-18
2.7 Turning the Printer
ON
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, press the Power Switch as shown in the
diagram below. Note that ( | )
is the power ON side of the switch.
2. Check that the ON LINE message appears in the LCD Message
Display and that the ON LINE and POWER LED (Green) are
illuminated.
CAUTION!
Use the power switch to turn the
p
rinter On/Off. Plugging or
unplugging the Power Cord to
turn the printer On/Off may
cause fire, an electric shock, or
damage to the printer.
NOTES:
1. If a message other than ON
LINE appears on the display or
the ERROR LED (Red) is
illuminated, go to Section 5.1,
Error Messages.
2. To turn OFF the printer power
turn the Power Switch to the
{” side position.
Power Switch