User’s Manual 2-5
The Grand Tour
Underside
The following figure shows the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.
The underside of the computer
1. Battery lock 4. Memory module slot
2. Battery pack 5. Cooling vents
3. Battery release latch
1 2 3
5
4
Battery lock Slide the battery lock to release the battery pack
ready for removal.
Battery pack The battery pack provides power to the computer
when the AC adaptor is not connected. For more
detailed information on the use and operation of
the battery pack please refer to Chapter 6, Power
and Power-Up Modes.
Battery release latch Slide and hold this latch into its "Unlock" position
in order to release the battery pack for removal.
For more detailed information on removing the
battery pack please refer to Chapter 6, Power
and Power-Up Modes.
Memory module slot The memory module slot allows for the
installation, replacement and removal of
additional memory module.
Refer to the Additional memory module section
in Chapter 3, Hardware, Utilities and Options.