DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than
once.
BDs
BD-R and BD-R DL discs can be written only once. The recorded data
cannot be erased or changed.
BD-RE and BD-RE DL discs can be recorded more than once.
Writing CD/DVD/BDs
The TOSHIBA Disc Creator and Corel Digital Studio are provided as writing
software with this computer.
Corel Digital Studio can be used to write files in video format. TOSHIBA
Disc Creator can be used to write data.
You can use the DVD Super Multi drive or BD-Combo drive to write data to
either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL,
DVD+RW, DVD-RAM or DVD-R DL discs.
You can use the BD-Writer drive to write data to either CD-R, CD-RW,
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM,
DVD-R DL, BD-R or BD-RE discs.
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket. It is
possible that, if data is written while powered by the battery pack, the write
process may sometimes fail due to low battery power - in these instances
data loss may occur.
Important message
Before you write or rewrite to any of the media supported by the DVD
Super Multi Drive or BD-Combo/BD-Writer drive, please read and follow all
of the setup and operating instructions in this section. If you fail to do so,
you may find that the DVD Super Multi drive or BD-Combo/BD-Writer drive
may not function properly, and you may fail to write or rewrite information
successfully - this may cause you to either lose data or incur other damage
to the drive or media.
Disclaimer
TOSHIBA does not bear responsibility for the following:
Damage to any disc that may be caused by writing or rewriting with
this product.
Any change or loss of the recorded contents of media that may be
caused by writing or rewriting with this product, or for any business
profit loss or business interruption that may be caused by the change
or loss of the recorded contents.
C670/C670D/L770/L775/L770D/L775D
User's Manual 3-9