Do not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD or Blu-ray disc.
Do not perform any of the following actions:
Operate the computer for any other function, including using a mouse
or Touch Pad, or closing/opening the display panel.
Bump or cause vibration to the computer.
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
Open the DVD/BD drive.
Install, remove or connect external devices, including the following:
memory media card, USB device, external display, optical digital
devices.
Please verify your disc after recording important data.
Not support to output VCD and SVCD format.
Force eject disc.
About recorded DVDs and Blu-ray discs
Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
When playing your recorded DVD on your computer, please use the
TOSHIBA VIDEO PLAYER software application.
When playing your recorded Blu-ray Disc on your computer, please
use the WinDVD BD for TOSHIBA software application.
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
TOSHIBA VIDEO PLAYER (optional)
Please be aware of the following limitations when you use the TOSHIBA
VIDEO PLAYER:
Notes on use
This software can only be used on Windows 7.
TOSHIBA VIDEO PLAYER software is supported for playback of
DVD-Video and DVD-VR.
Frame dropping, audio skipping or out of sync audio and video may
occur during playback of some DVD-Video titles.
Close all other applications when using the TOSHIBA VIDEO
PLAYER. Do not open any other applications or carry out any other
operations during video playback. Playback may stop or not function
properly in some situations.
Unfinalized DVDs created on home DVD recorders may not be
playable on the computer.
Use DVD-Video discs with a region code which is either "the same as
the factory default setting" (if applicable) or "ALL".
C670/C670D/L770/L775/L770D/L775D
User's Manual 3-15