Filter
Top Products
Appendix 5 System Mode
100
Specifying the Print Head to be Used
Press the PAUSE key.
After “PM ADJUST” appears, press the FEED key.
To select which print heads will be used, press the PAUSE key.
Select “ON” to use Head 1. Otherwise “OFF” will disable the
head.
After making a selection, press the PAUSE key.
Make a selection for Head 2 in the same manner.
After making the selection, press the PAUSE key, and the message
returns to “<2> PARAMETER SET”.
Specifying the Ribbon Type to be Used
Press the PAUSE key.
After “HEAD SELECT” appears, press the FEED key.
The ribbon type for each color can be selected. Press the PAUSE
key.
Select which ribbon will be used for Head 1: F1 (Hot Release
Ribbons) or P1S (Cold Release Ribbons).
After selecting the ribbon type, press the PAUSE key.
Select the ribbon type for Head 2 in the same manner.
After selecting the ribbon type for both colors, press the PAUSE
key. The message returns to “<2> PARAMETER SET”.
Note:
Use the FEED or RESTART key
to enter a desired option.
PM ADJUST
HEAD SELECT
HEAD1 ON
HEAD2 ON
Note:
The ribbon type can also be changed
in the printer properties on the
computer. See Section 3.8.2.
HEAD SELECT
RIBBON
HEAD1 F1
HEAD2 F1
A5.4 Parameter
Setting (Cont.)