Filter
Top Products
Chapter 3 Printing
47
3.4.3 Color Setup
This section describes how to specify the colors of the ribbons that
are loaded in the printer.
To obtain a desired print output, the ribbon colors need to be specified
appropriately in Color Setup on the Graphics property page.
In this section, suppose the black ribbon is loaded in Head 1 (Back)
and the yellow one in Head 2 (Front). See Section 2.7.1 for more
detail about the ribbon positions.
1
Click Color Set up on the Graphics property page.
2
Click the Color 1 down arrow to enter the ribbon color for Head
2 (Front). Since the yellow ribbon is loaded, select Yellow from
the color list.
Do not mark the Color 1 checkbox when Head 2 is not used.
Important!:
Enter the ribbon color for Head 2
(Front) in Color 1, and the one for
Head 1 (Back) in Color 2.