Filter
Top Products
Chapter 3 Printing
59
3.8 Testing
This section describes how to perform maintenance and printer testing.
The Testing property page can help determine how well the computer
is communicating with the printer and verify that certain settings are
correct.
Click the Testing tab to open the Testing property page.
Note:
The “Error Writing to LPT1” message
appears when trying to use the
functions in the Testing property page
without connecting the printer to your
computer.
3.8.1 Testing Print Test Label
See Section 3.9.1 for further information.
Check Print Head
Click Check Print Head to begin running the printer’s built-in head test.
Click the Head down arrow to select the print head to check.
Mark the Specify Range checkbox to specify the range for the print
head check.
Click OK to start checking the print head.
If there are problems with the print head, an error message will appear
on the printer’s Message Display, and the print head must be replaced
right away.
Send File to Printer and Logging Options
These two buttons are used by a technician for a system integration
purpose. So typically, you do not have to use these buttons. Please
contact your authorized service representative before using the
buttons.