Toshiba e-STUDIO166 Printer User Manual


 
1 PREPARATION
32 Preparation 2 - Placing Copy Paper
Recommended paper
To ensure the best copy performance, TOSHIBA recommends the paper types listed below. If
you want to use paper other than that we recommend, contact your service technician.
*1 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
Paper types not acceptable
Do not use the types of paper listed below since they may cause paper jams.
y Damp paper
y Creased paper
y Wrinkled paper or paper prone to be curled
y Paper whose surface is extremely smooth or rough
Do not use the types of paper listed below since they may cause an equipment malfunction.
y Paper whose surface is specially treated
y Paper once printed with other copiers or printers
Storing paper
Observe the following cautions when storing copy paper:
y Wrap copy paper in its wrapping paper to prevent it from gathering dust.
y Do not expose copy paper to direct sunlight.
y Store copy paper in a damp-free place.
y Store copy paper on a flat surface to prevent it from being creased or bent.
Media type Product name
Plain paper TGIS Paper/Neusiedler
80 g/m
2
THICK PAPER 1 Colour Copy/Neusiedler
90 g/m
2
Colour Copy/Neusiedler
100 g/m
2
THICK PAPER 2 Colour Copy/Neusiedler
120 g/m
2
Colour Copy/Neusiedler
160 g/m
2
Tracing paper
75 g/m
2
tracing paper
Sticker labels 3478/Zweckform-Avery
Transparencies
*1
PP2500/3M