Filter
Top Products
2 HOW TO MAKE COPIES
50 Using Bypass Tray
Using Bypass Tray
Place paper on the bypass tray when you use the following media types as copy paper:
y Thick paper (81 to 163 g/m
2
)
y Special media types such as tracing paper, sticker labels or overhead transparencies
y Standard size paper which cannot be placed in a drawer (e.g. A5-R)
Using the bypass tray is recommended also for copying on standard-size paper other than those
placed in the drawers. The following sizes are available for bypass copying:
*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended
paper is used. See the following page for the TOSHIBA-recommended paper:
P.32 “Recommended paper”
*2 50 to 63 g/m
2
paper can be used if it is set on the bypass tray sheet by sheet.
*3 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
Media type Paper size
Maximum sheet
capacity
*1
Plain paper
(64 - 80 g/m
2
)
*2
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
100 sheets (64 g/m
2
)
100 sheets (80 g/m
2
)
THICK PAPER 1
(81 - 105 g/m
2
)
1 sheet
(81 - 105 g/m
2
)
THICK PAPER 2
(106 - 163 g/m
2
)
1 sheet
(106 - 163 g/m
2
)
Tracing paper
(75 g/m
2
)
1 sheet
Sticker labels 1 sheet
Transparencies
*3
A4 only
1 sheet