Filter
Top Products
Colour Balance (YMCK Adjustment) 141
4
Press the or button of the colour to obtain the desired colour
balance. Then press the [ENTER] button.
y at the centre of each colour bar denotes its default setting.
y Pressing the button strengthens the adjusted colour, and pressing the button
weakens it.
y Select other copy modes as required.
Each colour balance on every density area can be adjusted by your pressing the
[DETAIL] button.
For example, when you adjust the high density area of magenta (M) to side, magenta
in its high density area becomes darker. When you adjust the low density area of
magenta (M) to side, magenta in its low density area becomes lighter.
5
Press the [START] button.
Cancelling the colour balance adjustment
Move the indicator of the colour whose adjustment you want to cancel its adjustment to by
your pressing the or button, and then press the [ENTER] button.
If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then press
the [ENTER] button.