Filter
Top Products
Twin Colour (2-Colour) Copy 151
6
Adjust the colour balance or the red-and-black area adjustment as
required. Press the [ENTER] button after adjustment.
Red colour balance adjustment
Press the or button of the desired colour to adjust the red colour balance.
Red colour balance adjustment
Press the or button to adjust the area to be copied in red or black. When you set
the red area larger, the area copied in red becomes larger. When you set the black area
larger, the area copied in black becomes larger.
Each the colour balance of yellow and magenta on every density area can be adjusted by
your pressing the [DETAIL] button.
For example, when you adjust the high density area of magenta (M) to side, magenta
in its high density area becomes darker. When you adjust the low density area of
magenta (M) to side, magenta in its low density area becomes lighter.
7
Select other copy modes as required, and then press the [START]
button.
Cancelling colour balance adjustment
y Set the colour balance of the colour you want to cancel its adjustment to , and then press
the [ENTER] button.
y If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then
press the [ENTER] button.
A B