Filter
Top Products
Preparation 1- Turning Power On/Off 45
Preparation 1- Turning Power On/Off
Turning power on
Open the switch cover, and then turn the power switch on.
y The equipment starts warming-up. “Wait Warming Up” appears during warming-up.
y While the equipment is warming up, you can use the auto job start function.
( P.82 “Scanning the next originals during copying (Auto job start)”)
The equipment will be ready for copying after about 99 seconds and “READY” appears.
When you turn the power of the equipment OFF, do not simply turn the power switch to turn it off
but be sure to shut it down.
P.50 “Turning power off (Shutdown)”
When the use of the equipment is managed under department management or user manage-
ment function, you need to enter the department code or user information before making a copy.
For details, see P.46 “When department or user management is used”.