Filter
Top Products
Preparation 3- Setting Copy Paper 55
Recommended paper
To make copies with a fine colour image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service techni-
cian.
*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
y Avoid using paper that is specially treated or previously printed on another machine, and
also avoid performing double copying on the same side of the paper, since this may cause a
malfunction.
y Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough
paper; this may cause paper misfeeds.
y Paper should be wrapped in its wrapping and stored in a damp-free place.
y To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper type Toshiba recommendations/Manufacturer Mode
Plain paper ColourCopy/mondi
90 g/m
2
PLAIN
100 g/m
2
Thick
120 g/m
2
THICK1
160 g/m
2
200 g/m
2
THICK2
220 g/m
2
THICK3
250 g/m
2
Sticker labels 3478/Zweckform-Avery - THICK2
Transparencies
*1
BG72/FOLEX - TRANSPARENCY
Water proof paper Water Proof Paper Duplex/
TOMOEGAWA PAPER
230 g/m
2
SPECIAL1
AquaAce/Verbatim
230 g/m
2
SPECIAL2