Filter
Top Products
Description of Each Component 35
8. Saddle Stitch Finisher (MJ-1030)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. The
Hole Punch Unit (optional, MJ-6004) can be installed to this finisher. The Bridge Unit
(optional, KN-3500) is required for the installation of this finisher.
9. Hole Punch Unit (MJ-6101)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1101).
10. Hole Punch Unit (MJ-6004)
This unit enables you to punch holes on printouts. It can be used by installing it on the Fin-
isher (MJ-1030).
Other options available are as follows. Contact your service technician or Toshiba product dis-
tributors for details.
Work Table (KK-3511)
This is a small table for placing originals while the equipment is operated.
y Installed on the right-hand side of the equipment
y Cannot be installed with e-BRIDGE ID Gate at the same time
FAX Unit (GD-1210)
This is a unit for using the equipment as a Fax.
y Installed inside of the equipment
2nd Line for Fax Unit (GD-1160)
This unit enables to add a line to the Fax to make it 2nd line.
y Installed inside of the equipment
y The Fax Unit (GD-1210) is necessary.
Data Overwrite Kit (GP-1060)
This is a kit to delete the temporarily stored data when copy, print, scan, Fax, internet Fax and
network Fax are performed.
y Installed inside of the equipment
512 MB Expansion Memory (GC-1250)
This memory enables the B4, A3 and FOLIO (LD, LG, 13" LG, COMP) size originals to be
scanned with the slim PDF format.
y Installed inside of the equipment
256 MB Expansion Memory (GC-1260)
This memory enables scanning in the full colour, auto colour and image smoothing mode with
600 dpi.
y Installed inside of the equipment
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
y Installed inside of the equipment
y The Antenna (GN-3010) is necessary.
y The equipment cannot be connected to the wireless and wired LAN at the same time.
Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
y Installed inside of the equipment
y The Antenna (GN-3010) is necessary.