Filter
Top Products
- 14 -
EO1-11113
JOURNAL INDICATIONS ON INDIVIDUAL TERMINALS (when report data is collected)
3.3. OPERATIONS AFTER IN-LINE REPORT TAKINGS
The following operations are available after taking in-line reports.
CONSOLIDATED REPORT DATA READ (REPRINT)
This operation issues the report data which is remaining in the Consolidation Memory of the
Master Terminal.
OPERATION ON MASTER TERMINAL: Mode Lock: X/RTR Declaration : ON
90 [AT/TL]
When no consolidated data are remaining in the memory, this read operation is unavailable.
ENFORCED CLEAR OF HOLD CONDITION (on Individual Terminals)
This can be operated when the HOLD condition on a terminal can by no means be cleared
because the terminal cannot receive a Clear Command from the Master Terminal for some
reason (the Master Terminal becomes down, etc. before completion of the reset report data
collection).
OPERATION ON ANY TERMINAL IN HOLD CONDTION: Mode Lock: Z
9999 [AT/TL]
On operating this, the HOLD condition is cleared, and allowing any key-in operations.
However, this operation is regarded as an emergent measure to cope with such a trouble as the
Master Terminal becomes down, etc. and thus no other solutions can be chosen, because the
sales data memory of those reports can no longer be collected by the Master Terminal.
Reset Report Collection Indication
Time of Clear Command receiving
Read Report Collection Indication
Time of data collection
Report ID No. (X is replaced by Z on reset reports.)
* X 03 15:40TM*
* X 03 15:40TM*
= Z 03 15:40TM=