Filter
Top Products
- 4 -
EO1-11113
2.2 OTHER OPERATIONS REQUIRING MANAGER INTER-
VENTIONS
Amount Limit Release
Amount Limits may be programmed on Departments/PLUs, Tender Medias, [DOLL DISC], [VND CPN],
[STR CPN], [BTL RTN]. These limits are programmed to check an excessively high or low amount entry
by cashier’s mistake at the earliest stage. Guide your cashiers as in the following procedure:
(1) During sale entries by the cashier, an error occurs with Error Message “OPE ERR” (programmable)
displayed.
(2) The cashier clears the error by the [C] key. The cashier confirms the amount and operate the item again.
(3) If the same error occurs again, the cashier attempts to enter the amount using the [LC OPEN] or [OPEN]
key.
(4) If the operation results in an error again, the Amount Limit cannot be solved by the [LC OPEN] or [OPEN]
key.
(5) The cashier calls for Manager Intervention.
The procedure thereafter is the same as Steps 2) to 7) for the ITEMS PROGRAMMED TO REQUIRE
MANAGER INTERVENTIONS. (Section 2.1)
n In need of information of Amount Limits, see the following:
1) Individual Department High and Low Amount Limits (each PLU is restricted by the Amount Limits
of its linked department): Ask your TOSHIBA TEC representative.
2) Departments Common High and Low Amount Limits, and High Amount Limits of Tender Media keys:
Chapter 7: VERIFICATION OF PROGRAMMED DATA
• FUNCTION KEYS AMOUNT LIMIT READ
3) High Amount Limits for [DOLL DISC], [VND CPN], [STR CPN], and [BTL RTN] keys:
Chapter 7: VERIFICATION OF PROGRAMMED DATA
• NEGATIVE AMOUNT KEY AMOUNT LIMIT READ
4) For setting or changing the current Amount Limits, see the following:
Chapter 6: PROGRAMMING OPERATIONS
• AMOUNT LIMIT SETTING FOR FUNCTION KEYS (Submode 8)
• NEGATIVE AMOUNT KEY AMOUNT LIMIT SETTING OR CHANGING (Submode 35)