Filter
Top Products
8
Setting up the NetWare Server
Configure the NetWare Server for printing with GA-1120/GA-1130.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 2: Setting up Network Servers
➤ GA-1120/GA-1130 on a NetWare 4.x or 5.x network
➤ GA-1120/GA-1130 on a NetWare 5.x network with NDPS
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway
Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 4: Performing Setup from the Control Panel
▼ Network Setup options
▼ Protocol Setup options
➤ TCP/IP Setup options
Setting up IPX/SPX (when using NetWare in IPX/SPX network)
Configure the IPX/SPX frame type for the GA-1120/GA-1130 from Fiery WebSetup or Command
WorkStation.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 5: Setting up the GA-1120/GA-1130 from a Windows Computer
▼ Network Setup
▼ Protocols
➤ IPX/SPX
Setting up the Printing Service
Enable the PServer Setup options and NDS Setup options (when using in NDS/NDPS mode), or
Bindery Setup options (when using in Bindery mode) from Fiery WebSetup or Command
WorkStation.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 5: Setting up the GA-1120/GA-1130 from a Windows Computer