Filter
Top Products
29
INSTALLING THE
PRINTER DRIVER
(Windows)
6
Enter the IP address of the GA-1120/GA-1130
printer in the “Printer Name or IP Address”
field and click on [Next].
• When you use a WINS server, enter the print server
name of the GA-1120/GA-1130 printer provided from
the WINS server in the “Printer Name or IP Address”
field.
• In the “Port Name” field, the port name is
automatically entered according to the IP address or
printer name entered in the “Printer Name or IP
Address” field.
7
Select “Custom” and click on [Settings...].
• The Configure Standard TCP/IP Port Monitor screen
appears.
8
Select “LPR” at the “Protocol” option, enter a
queue name in the “Queue Name” field at the
“LPR Settings” option, and then click on [OK].
• In the “Queue Name” field, you have to enter a queue
name, direct, hold, or print, on the GA-1120/GA-1130
printer. Enter a queue depending on how you want to
print.
direct - print jobs are sent straight to the printer
without spooling.
hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
print - print jobs are spooled to the hard disk in the
GA-1120/GA-1130 printer and printed out. Use this
queue for general printing.
• You can also enable the LPR Byte Counting by
checking on “LPR Byte Counting Enabled”.