Filter
Top Products
4
SETUP FLOW
After completing each procedure, please mark the checkbox ( ) in front of each procedure so
that you can make sure completed each step for setup.
Setup Flow for Windows
For SMB Printing
Connecting the GA-1120/GA-1130
Connect the GA-1120/GA-1130 to your network with a network cable.
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 1: Connecting to the Network
➤ Connecting network cable to the GA-1120/GA-1130
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway
Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 4: Performing Setup from the Control Panel
▼ Network Setup options
▼ Protocol Setup options
➤ TCP/IP Setup options
Setting up the Printing Service
Configure the Windows Print Sharing to enable the Windows Printing Service from Fiery
WebSetup or Command WorkStation.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 5: Setting up the GA-1120/GA-1130 from a Windows Computer
▼ Network Setup
➤ Windows Print Sharing (SMB)