Toshiba GD-1270 Fax Machine User Manual


 
GD-1210/1250/1270/1160/1260 © 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
5 - 4
Notes:
If the equipment does not work properly after the operation (8), follow the procedure below and
then perform the “Clearing the image data” in the FAX Clearing Mode to erase the image data in
the memory.
Confirm the destination setting is correct in the Setting Mode (08).
08-201 / 08-9000 *1: Destination setting of the equipment
08-701 / 08-9001 *1: Destination setting of the FAX machine
*1: For e-STUDIO2040C/2540C/3040C/3540C/4540C, e-STUDIO5540C/6540C/6550C, e-
STUDIO206L/256/306/356/456 and e-STUDIO556/656/756/856.
Turn ON the power while [1] button and [*] button are pressed simultaneously.
Key in “102”.
Press the [START] button.
<<Confirmation of the updated data>>
After the updating is completed, check the data version in the Setting Mode (08) to confirm that the data
was overwritten properly.
08-915 / 08-9905 *1: FAX ROM version
*1: For e-STUDIO2040C/2540C/3040C/3540C/4540C, e-STUDIO5540C/6540C/6550C, e-
STUDIO206L/256/306/356/456 and e-STUDIO556/656/756/856.
11/12