Filter
Top Products
© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved GD-1210/1250/1270/1160/1260
ERROR CODES
1 - 3
1
2) Status code list
[Example of the indication of a status code]
For the combination of 14400 bps, 8x15.4 and MMR, as shown above, a status of “522” is indicate.
00D0 Post message not detected A post message cannot be detected. Retry the communica-
tion. MCF, RTP, RTN, PIN and PIP cannot be detected on the
sending side. MPS, EOM and EOP cannot be detected on the
receiving side.
00D1 Reception of DCN DCN was received.
00D2 Poor image quality Quality of the received image is poor. Retry the transmission.
00E8 HDD error Hardware is defective.
00F0 Software trouble Software is defective.
00F1 Hardware noise Hardware is defective.
Mode Transmission speed Resolution Encoding system
0 2400 8 x 3.85 MH
1 4800 8 x 7.7 MR
2 7200 8 x 15.4 MMR
3 9600 JBIG
4 12000 16 x 15.4
5 14400
6V.34
7
8 300 x 300
9
A
B
C
D
E
F
Error code Content Situation and corrective action
522
MMR
(
encoding system
)
8 x 15.4
(
resolution
)
14400
(
transmission speed
)