Filter
Top Products
4-2 User’s Manual
Operating Basics
For some functions, you can tap the TouchPad instead of pressing a control
button.
Using the USB floppy disk drive
An optional 3 ½" floppy disk drive connects to the computer's USB port. It
accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to
Chapter 2, The Grand Tour, for more information.
Connecting 3 ½" floppy disk drive
To connect the drive, plug the floppy disk drive connector into a USB port.
Refer to the following figure.
Connecting the USB floppy disk drive
Click: Tap the TouchPad once
Double-click: Tap the TouchPad twice
Drag and drop:
1. Hold down the left control button and move the cursor to drag the item
you want to move.
2. Lift your finger to drop the item where you want it.
Scroll:
Vertical: Move your finger up or down the right edge of the TouchPad.
Horizontal: Move your finger left or right along the bottom edge of the
TouchPad.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection; doing so can damage the
connecting pins.
If you connect the floppy disk drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds have elapsed.