Filter
Top Products
4 Replacement Procedures 4.6 Wireless LAN card
4.6 Wireless LAN Card
Removing the Wireless LAN Card
Remove the wireless LAN card according to the following procedures and Figure 4-11.
CAUTION: Do not touch the connectors on the wireless LAN card and in the computer
with your bare hands. Wireless LAN cards can fail if they are contaminated with sweat,
natural oils, etc. from your hands.
1. Disconnect the two antenna cables with tweezers.
2. Remove the two M2x3 black flat head screws securing the wireless LAN card.
3. Pull the wireless LAN card up from CN10 on the system board and out at an angle.
MAIN
AUX
Antenna
M2x3 black flat head screw
Wireless LAN card
Black cable
White cable
CN10
Figure 4-11 Removing the wireless LAN card
4-26 Satellite L300/ 305D/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual