Filter
Top Products
4 Replacement Procedures 4.7 Display Assembly
4.8 Display Assembly
Removing the Display Assembly
CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Turn the computer upside down and remove two M2.5x6 black flat head screws.
2. Restore the normal computer placement and open the display panel.
M2 5x6 black flat head screw.
Figure 4-14 Removing the screws from the back of the computer
3. Disconnect the LCD/FL cable from CN5 on the system board.
4. Disconnect the CCD cable from CN7 on the system board.
5. Disconnect the MIC cable from CN3 on the system board.
6. Remove four M2.5x6 black flat head screws securing the LCD module to the bottom
cover.
7. Remove the wireless antenna cables, CCD cable and MIC from the bottom cover.
8. Remove the display module.
4-30 Satellite L300/L305 / Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual