Filter
Top Products
User’s Manual 4-11
Operating Basics
Closing the CD/DVD/BD disc tray
Removing discs
To remove the CD/DVD/BD, follow the steps as detailed below:
1. To pop the disc tray partially open, press the eject button. Gently pull
the disc tray out until it is fully opened.
2. The CD/DVD/BD extends slightly over the sides of the disc tray so you
can grasp it. Gently lift out the CD/DVD/BD.
Removing a CD/DVD/BD
3. Push the center of the disc tray to close it. Press gently until it locks into
place.
Do not press the eject button while the computer is accessing the media
drive. Wait for the optical disc drive indicator to go out before you open the
disc tray. Also, if the CD/DVD/BD is spinning when you open the disc tray,
wait for it to stop before you remove it.
When the disc tray pops open slightly, wait a moment to make sure the
CD/DVD/BD has stopped spinning before pulling the disc tray fully open.