Filter
Top Products
User’s Manual 4-12
Operating Basics
How to remove CD/DVD/BD when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole near the eject button.
Manual release with the eject hole
Writing CD/DVD/BDs on DVD Super Multi drives, BD Writer
drives or BD Combo drives
You can use the DVD SuperMulti drive or BD Writer drives or BD Combo
drives to write data to either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer),
DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM, DVD-R
(Dual Layer) or BD-R/BD-RE discs.
TOSHIBA Disc Creator and Corel DVD MovieFactory are provided as
writing software with this computer.
Corel DVD MovieFactory can be used to write files in video format.
TOSHIBA Disc Creator can be used to write data.
1. Eject hole
1
Turn off the power before you use the eject hole. If the CD/DVD/BD is
spinning when you open the disc tray, the CD/DVD/BD could fly off the
spindle and cause injury.
The optical drive installed on this computer cannot write multiple sessions
on DVD-R Dual Layer disc sessions. Once a disc has been written to
once, it will be finalized. Once finalized, no further writing to the disc will be
possible regardless of what portion of the total disc capacity was used.