Filter
Top Products
4.21 LCD Module 4 Replacement Procedures
Satellite M70/Satellite Pro M70 Series Maintenance Manual [CONFIDENTIAL] 4-57
Installing the LCD Module
To install the LCD module, follow the steps below and refer to the figures in the preceding section.
1. Set the LCD module in the display assembly.
2. Connect the FL cable and the HV cable to the FL inverter board.
3. Set the LCD module in the display assembly with the LCD module bracket and eight M2x3
black screws. Secure the LCD module with two M2.5x6 black screws.
4. Secure one M2.5x3 black screw and one M2x3 black screw holding the left HV cable and FL
inverter board in place.