Filter
Top Products
Replacement Procedures
4
4.10 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-10-1
to 4-10-5).
1. Close the display and turn the computer upside down.
2. Remove the battery pack (See Figure 4-2-1)
3. Open the MAIN HDD Door and remove Optical Drive Disk.
Figure 4-10-1 Remove the screws (securing display assembly)
4. Open the SECOND HDD Door.
5. Remove the screws from the bottom side.
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
4-31