Filter
Top Products
Replacement Procedures
3. Pull out one insulator and peel off the other one adhered to the inverter.
4. Disconnect the LCD harnesses from the connectors CN1 on the inverter.
5. Disconnect the HV harnesses from the connectors CN2 on the inverter.
6. Remove the FL inverter while peeling off the double-sided tape.
CN1
LCD harness
Inverte
r
Insulator
CN2
HV harness
Double-sided tape
Figure 4-16-2 Remove the inverter
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
51