Filter
Top Products
Troubleshooting Procedures
2.16 Bluetooth Troubleshooting
To check if the computer’s B tooth is malfunctioning or not, follow the troubleshooting
procedure below as instructed.
Procedure 1: Connector Check and Replacement Check
Procedure 1 Connector Check and Replacement Check
The B tooth function is connected to system board. If B tooth malfunctions, its
connection is defective or B tooth cable and system board may be faulty.
Check 1 Make sure B tooth cable is firmly connected to the connector CN13
. If the problem still occurs, perform Check 2.
Check 2 B tooth cable may be faulty. Replace it with a new one. If the problem s till
occurs, perform Check 3.
Check 3 B tooth may be faulty. Replace it with a new one following the steps in Chapter
4. If the problem still occurs, perform Check 4.
Check 4 System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
48
Satellite P500 Maintenance Manual (960-Q08)