Filter
Top Products
User’s Manual 3-23
Hardware, Utilities and Options
Figure 3-9 Removing the memory module
8. Seat the memory module cover in place and secure it with one screw.
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, if required.
10.Turn your computer over.
Battery Charger
The battery charger provides a convenient way to charge battery packs
without requiring the use of your computer. The battery charger holds up to
two battery packs (lithium ion).
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer's power off.
Latches
Slot B
Slot A
Take care to ensure that the memory module cover is firmly closed.