Toshiba PT930 Surge Protector User Manual


 
T
HE
G
RAND
T
OUR
2-5
External monitor This 15-pin port lets you connect an external video
port display.
Serial port Use this 9-pin port to connect external serial devices such
as an external modem, a serial mouse or printer.
Parallel port This Centronics-compatible, 25-pin parallel port is used to
connect a parallel printer or other parallel device. This port
supports Extended Capabilities Port (ECP) standard.
LAN jack This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per second,
10BASE-T), Fast Ethernet LAN (100 megabits per second,
100BASE-Tx) and Gigabit Ethernet LAN (1000 megabits
per second, 1000BASE-T). The LAN has two indicators.
See Chapter 4, Operating Basics, for details.
LAN active This indicator glows orange when data is being exchanged
indicator (orange) between the computer and the LAN.
Link indicator This indicator glows green when the computer is connect-
(green) ed to a LAN and the LAN is functioning properly.
DC IN 15V The AC adaptor connects to this socket. Use only the
model of AC adaptor that comes with the computer. Using
the wrong adaptor can damage your computer.
Video-out jack Plug an S-Video cable into this jack for video-out. The S-
Video cable carries video signal.
Modem jack In areas where an internal modem is installed as standard
equipment, there is a modem jack that lets you use a
modular cable to connect the modem directly to a tele-
phone line.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
from the telephone jack.
2. Do not connect the modem to a digital telephone line.
A digital line will damage the modem.
Back side
DC IN 15V
Ether