Filter
Top Products
Chapter 4 Replacement Procedures
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual (960-Q08)
4.5 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-5-1 to 4-5-2).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the
frame and do not touch the keycap.
1. Upside down the computer and remove the battery.
2. Loose the screws on KB holder.
M2.0x2.0B Flat BIND screws x2
3. Open the display.
4. Insert your finger into the slot between the KB holder and the keyboard. Then, lift up
the keyboard holder to remove it.
5. Loose the screw securing Keyboard.
M2.0x3.0B Flat BIND screws x2
6. Insert your finger into the slot between keyboard and top cover. Then lift up the
keyboard to remove it.
7. Disconnect keyboard cable.