Filter
Top Products
Chapter 3 Test Program for Field
3.2 Executing the Diagnostic Test
Free-DOS is required to run the Diagnostics Program. To start the programs follow these
steps:
1. Create a Free-DOS bootable disk and copy all the files from the Tests and
Diagnostics software to the disk.
2. Insert the boot disk into the computer’s floppy disk drive and turn on the computer.
NOTES: If error message display “Sorry. This Model Type Not Match This Machine”:
Please Check:
1. You test disk is match this model, ex. disk is 14” but machine is 13”.
2. The M/B EEPROM project type is math your test disk, if not, please use WDMI3.EXE to
modify with right LCD size.
The following screen displays:
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (960-Q08)
::Select item
ESC :Escape
[DIAGNOSTICS MENU]
01.DIAGNOSTIC TEST
02.RUNNING TEST
03.DMI INFORMATION
04.LOG UTILITIES
05.SYSTEM CONFIGURATION
06.OPTION
99.EXIT
TOSHIBA Satellite(Pro) P500 Diagnostics
Version v1.00
3. To select the Diagnostic Test from the Diagnostics Menu use the arrow keys to set the
highlight bar to 01 and press Enter.