Filter
Top Products
Chapter 4 Replacement Procedures
Satellite T130, Satellite Pro T130, and PORTEGE T130Maintenance Manual (960-Q08)
4-39
4.10 Touch Pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4-
10-3).
1. Peel off the glass tape and disconnect the touch pad flat cable, Fingerprint cable
from the connector on the touch pad.
2. Remove the following screws securing the touch pad plate.
M2x2-I SUPER THIN HEAD screw x6
M2-0.4x2 SUPER THIN HEAD screw x2
M2.0x3.0 SUPER THIN HEAD screw x2
3. Remove the touch pad board and touch pad plate.
4. Peel off and remove the touch pad from the cover assembly.