Filter
Top Products
Chapter 4 Replacement Procedures
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (960-Q08)
55
Installing the LCD unit
The following describes the procedure for installing the LCD unit.
Install the LCD supports (LCD unit side) and hinge to the LCD and secure them with the
following screws.
M2.02.5 BINK screw x4
1. Stand the LCD unit on the display cover and connect the LCD harness to the
connector on the back of LCD.
2. Stick the kapton tape on the connector of LCD harness.
3. Secure the LCD unit with the following screws.
M2.0x3.0 screw x6
4. Secure the display mask with following screws
M2. 05 screw x4
5. Cover screws with Screw MYLAR cover x4
NOTE: When installing the display mask, make sure there is no gap between the display
mask and the display cover.